- About Dingo
- Dingo Range
- Dingo Jungle Tamer Attachment
- Dingo General Purpose Bucket
- Dingo 4in1 Bucket
- Dingo Chip Bark Bucket
- Dingo Narrow Bucket
- Dingo Multi Purpose Tool
- Dingo Leveller
- Dingo Cement Mixer
- Dingo Post Hole Digger
- Dingo Fork Lift Attachment
- Dingo Trencher
- Dingo Blade
- Dingo Carry-All Bridge Leveller
- Dingo Debris Puller
- Dingo 3in1 Grab
- Dingo Broom Bucket
- Dingo Rock Breaker
- Dingo Block Splitter
- Dingo Rotary hoe
- Dingo Stump Grinder
- Dingo Block Grab
- Dingo Wombat Spot Cultivator
- Dingo Lawn Aerator
- Dingo Post Mate
- Dingo Rock Screen
- Used Machines
- HIRE SHOP
Dingo K9-R Remote Controlled Mini Digger
The OZZY Dingo K9-R is the remote controlled solution to those clean up jobs where conditions are too dangerous for an operator. When out of the danger zone, an operator can stand on the back and operate as a regular Dingo.
The Ozzy K9-R is used in smelters, factories, mines and anywhere conditions are to dangerous for an operator.
The K9-R is fitted with a remote control unit that controls the two drive levers, the bucket lift, bucket tilt levers.
|Hydraulic Pump (Dingo Spec)||3 Pumps|
|Pump Sizes||16 cc|
|Relief pressure (Aux)||3400 psi|
|Hydraulic Output||48 l/min|
|Max Travel Speed||0-7.8km/hr|
|Rated Lift Capacity||SWL:325kg|
|Wheel Motors||4 X 29 cu in|
|Aux Hydraulic Outlets||1|
|A||Overall Width||790mm - 1030mm|
|D||Max Operating Height 4 in 1||2650mm|
|E||Turning Radius With 4in1 Bucket||1300mm|
|F||Angle Of Departure||25º|
|I||Dump Height Std Bucket||1450mm|
|J||Dump Height 4in1 Bucket||1835mm|
|K||reach Fully Raised 4in1 Bucket||800mm|
|L||Height To Hinge Pin||1940mm|
|M||Machine Width 4in1 Bucket||1050mm|
|Hydraulic Reservoir Capacity||76L|
|Machine Mass||928kg (Approx)|
|Dingo Warranty||3 years/1000hrs|
Remote Start and Stop: Allows the machine to be started and stopped remotely, so the operator does not need to enter a hazardous area.
Emergency Stop: Anyone can shut down the machine instantly without the control panel. (Machine can be shut down either on the control panel or at the machine)
User Friendly Control Panel: The control panel sits comfortably around the operator’s waist. The levers of the control panel are in the same position as the levers of the Dingo making it easy to master.
Fully Proportional and Adjustable Control Panel: This makes controlling the Dingo smoothly and safely and can be adjusted to suit the environment.
Adaptability: Whether you require buckets or trenchers, levellers or forks, the Dingo can be easily adapted.
Patented Cast Steel Chassis: Contractor Remote Controlled unique cast steel chassis is not only the strongest in its class, but the innovative design allows a huge 27HP engine to be fitted into an envelope small enough to get to the most confined work sites.
1030mm – 790mm Machine Width: When fitted with a narrow access kit the Dingo K9-R measures just 790mm wide, making it one of the few mini diggers on the market that can fit through a standard doorway.
1.835m Lift Height: An impressive lift height that will allow you to load most small trucks.
325kg SWL: Safe working load of 325kg allows it to carry the full range of industrial attachments. (SWL is rated at 50% of what the machine is capable of lifting).
AWD System: Dingo’s All Wheel Drive system means power to each wheel and no drive chain maintenance.
Marine Grade Aluminium Body Panels: Rust resistant, can take plenty of punishment and still protect your valuable investment. The panels can be removed easily giving you full access to the engine and hydraulics systems, making servicing a breeze.
|Traction Options For All Conditions Including Narrow Wheels Or Solid|
|Reflective Tape On Sides, Front And Rear|
|Lockable Battery Isolation Switch|